Bandsaw guide adjusting nuts
(LBS-130)
LBS-130 knurled nuts, for adjusting the blade guides and thrust bearing on Delta 14" bandsaws, as well as the old style 20" bandsaw (28-350)
Reproduced in brass, they are threaded for 5/16's by 24 tpi. Measuring 5/8" in diameter and 3/4" in height. $14.25 each plus shipping and handling.
Two nuts used for upper blade guides on Delta
bandsaws. Early model 14" bandsaws (e.g. model 890)
used two additional nuts for the lower guides.
Also available, special threaded studs found on the Delta bandsaw guides,
measuring 1 3/4" in length, 5/16" by 24 tpi
threading.Composition: untreated steel.
$3.75 each plus shipping and handling.
| LBS-130 Guide Adjusting Nut - | |
| LBS-129 Threaded Stud - | |