If you own a Delta/Crescent/Rockwell 12/14 Table saw, you'll probably recognize these as the special cap screws and spacers that hold on the rails for the original Micro-Set rip fence. When I last checked, you could still get the screws from Black and Decker/ServiceNet for over $34 (part number 422060795002), and the spacers are "no longer available."
Threaded for 7/16's by 14 tpi, they are 5/8" diameter and 3 1/8" overall length. Single screw available at $30.00, spacer $8.00, or purchase the entire assembly, including the nickel plated cap screw, nickel plated spacer, and unplated, off-the-shelf nut and lockwasher for $36.00 plus shipping and handling.
|
TAS-117 Special screw assembly