Hard to Find Accessories and Parts
-
-
Ball end feed lever, part DP-748:
Accomodates all Delta-Rockwell presses with 7/16's pinion hole, incl most 14", 15", and 17" machines. Stainless steel with phenolic knobs. Overall length 12".
Price: $48.00
Drill Press Table Index Pins
For Delta-Rockwell drill press tables with a 1/4" alignment hole, as found on the 14" and many 15" drill presses. Stainless steel.
Price: $15.00
Motor Pulley (Refurbished) for the Delta-Rockwell Drill Press:
For Delta drill presses with 4 step spindle pulleys, including the 14"; and earlier 15" machines. All are genuine Delta-Rockwell old stock that have been inspected and refurbished to like-new condition. Also fits Homecraft line of drill presses.
Supply is limited ! Call or email for pricing!
Set screws and key included where applicable.
Delta Rockwell Drill Press Spindle Bearings
ND-88100 special bearings for 14" Delta drill presses (spindle bearings):
Special spindle bearings for your vintage Delta - Rockwell 14 drill press. Corresponds to part numbers ND-88100, C88100 and SP-5342. Proprietary design allows for slip fit for use with Delta's changeable drill press spindles.
Pricing: $50.00 individual
$90.00
set of two
Bearing Retaining Rings, Part DP-242 for Delta 14" Drill Presses:
Due to popular demand, now available are bearing retaining rings/nuts for your Delta 14" press. Made of alloy steel.
Pricing: $18.00 each
or
$30.00 a pair
DP-277 spindle pulley bearing, for Delta 14" & 15" drill presses,
(ND-88106)
A drop in replacement part for both the high speed and low speed models of the DP220 14" drill press, as well as many classic 15" Delta models. These proprietary bearings are now obsolete, making wear and failure of this critical part a significant issue with the potential purchase and/or operation of one of these fine machines. Double sealed 6205 bearing with pressed on custom extension for inner race. Threaded 3/8 by 24 NF, (National Fine), screw and lock washer included. Corresponds to Delta parts DP-277, SP-5373, 1202434, ND-88106, 6368 and HDP-129.
Pricing: $58.50 each
Adjustable Clamp Handle
Adjustable clamp handles. Part # SR-217, as found on various classic Delta-Rockwell machines, including drill presses, wood lathes, the 48" belt sander, jointers, and many others. Assembly includes insert, ball handle screw and washer. Black enamel finish. Available female threaded 7/16th's by 14 and 1/2 by 13.
Delta Drill Press Spindle Rebuild Services
Have us rebuild your 14" Drill Press spindle/quill
Rebuilt spindle includes new ND-88100 bearings, assembly cleaned, re-assembled and Jacobs taper trued if necessary.
More info here
Rebuilt spindle pulley assemblies for the Delta 14 inch drill press:
Due to popular demand, we now offer completely refurbished spindle pulleys. Delta original equipment pulleys rebuilt to like-new condition, incl new ND-88106 bearing (Delta part DP-277) installed, available for both the hi speed and slo speed model 14 " Delta-Rockwell drill presses. Worn spindle pulleys and ones with bad bearings are now a 90 second fix ! Limited supply, please call for availability and pricing.
Depth Stop Nuts 1/2" by 16 threaded
Sold in pairs, depth stop nuts are threaded for 1/2" by 16 National Special. Available in nickel plate and black oxide finish. Also available is the DP-318 special washer. Prices are $45.00 per pair black oxide, & $55.00 in nickel plate.
DP-318 special washer, 1/2 inch rod, available in nickel plate ($4.50) or black oxide ($3.50)
Lower Collar for Delta 14" drill press spindles, Part DP-249:
Often damaged during chuck removal, collar retains the drive pin on Jacobs #33 taper spindles. Press fit. Aluminum.
Price: $15.00 each
Stop rod, 1/2" by 16 NS threading, Part DP-273:
Black oxide finish. Lock washer and 3/8-16 nut included.
Price: $75.00 each
Upper drive collar for Delta 14" drill press spindles, Part DP-477 (also DP-250):
Upper drive collar, includes set screw.
Price: $55.00 each